Metso Insights Blog Mining and metals blog The evolution of pneumatic flotation technology: enhancing efficiency in mineral processing
Mining
Apr 18, 2024

The evolution of pneumatic flotation technology: enhancing efficiency in mineral processing

Quinton Losper
Quinton Losper
Product Manager, Pneumatic Flotation Services
In the realm of mineral processing, flotation technology stands as a vital tool, facilitating the separation of valuable minerals from gangue. Flotation holds significance across all particle sizes, but its importance in fine particle recovery has surged. This escalation is attributed to the finer grinding necessitated by lower head grades and increasingly complex ores. For decades, mechanical flotation cells dominated the industry, relying on rotors to stir the slurry and generate bubbles for particle attachment.

The emergence of pneumatic flotation technology has revolutionized mineral processing, offering a more efficient and effective approach to separating valuable minerals from gangue. These cells utilize forced air and slurry mixtures at high velocities to create bubbles, eliminating the need for mechanical agitation.  One of the key advantages of this method is its ability to not only reduce energy consumption but also to improve the quality of the froth and increase flotation rates, especially for fine particles. This evolution reflects a broader trend in mineral processing, where continual technological advancements are pursued to optimize operations and address the dynamic demands of the market.

The transition to pneumatic flotation cells revolutionized mineral processing. The advent of self-aspirated pneumatic flotation cells introduced innovative approaches, such as vertical columns or downcomers, which dispersed air and pulp into dense froths of bubbles. Despite being a novel technology, demands for finer bubble generation with larger fluxes and enhanced operational control over air-to-pulp ratios (APR) persisted, driving further innovations.

Industry demands and trends

In response to evolving industry needs, upgrading existing flotation technology has emerged as a cost-effective solution. Modern upgrades, like the Concorde Blast Tube™ upgrade for self-aspirated pneumatic flotation cells, offer several advantages. They enhance performance while minimizing additional capital expenditure and space requirements. These upgrades address challenges posed by complex ore bodies, provide operational flexibility, and ensure rapid returns on investment, aligning with the dynamic nature of the market.

The push for upgrading flotation technology is underpinned by several pivotal factors, each contributing to the industry's pursuit of enhanced efficiency and competitiveness:

Cost-effectiveness: Upgrades present a financially practical path to improving performance without the hefty investment associated with new installations. By optimizing existing equipment, operations stand to boost their recovery rates and throughput, thereby bolstering profitability without breaking the bank.

Reduced footprint: Modern upgrades, exemplified by innovations like the Concorde blast tube for self-aspirated pneumatic flotation cells, are designed to seamlessly integrate into current flotation setups. This design ethos minimizes the need for additional space, offering a benefit to operations grappling with spatial limitations imposed by environmental regulations or other constraints.

Meeting modern ore challenges: With ore bodies evolving to become increasingly complex and lower in grade, the efficacy of traditional flotation technology wanes. Upgrades incorporating cutting-edge aeration and bubble generation techniques rise to this challenge, ensuring competitive recovery rates in the face of these demanding ore types.

Operational flexibility: Upgrades often bundle advanced control systems and automation features, affording operators greater flexibility and precision in managing flotation processes. This adaptability proves invaluable for navigating variations in ore quality and composition, ensuring consistent performance amidst changing operational landscapes.

Quick Implementation and ROI: Upgrading existing systems typically offers quicker implementation timelines compared to constructing entirely new facilities. This swift turnaround translates to faster returns on investment, a critical advantage in a dynamic market characterized by fluctuating mineral prices and demand.

These driving forces underscore the imperative for continuous innovation and improvement in flotation technology, enabling mineral processing operations to stay ahead in an ever-evolving landscape.

Concorde Blast Tube technology was tailored for operations equipped with existing self-aspirated pneumatic flotation cells, with a clear goal in mind: to elevate efficiency and performance while aligning with evolving demands for heightened productivity, minimizing environmental impact and cost-effectiveness.

Innovations in self-aspirated pneumatic flotation

Driven by a keen understanding of market needs and the imperative for modernization, Professor Jameson from the University of Newcastle assisted in the development of the Concorde Blast Tube in collaboration with Metso. This technology was tailored for operations equipped with existing self-aspirated pneumatic flotation cells, with a clear goal in mind: to elevate efficiency and performance while aligning with evolving demands for heightened productivity, minimizing environmental impact and cost-effectiveness.

At the heart of the Concorde Blast Tube lies a distinctive design feature: dual nozzles strategically positioned at the tube's top and bottom. This configuration, coupled with optimized operating conditions, propels the slurry at velocities approaching the speed of sound relative to a liquid medium. Upon reaching the choke (bottom nozzle), a shockwave is induced, further refining the already-formed bubbles as they traverse through the shockwave zone. This phenomenon, facilitated by a substantial pressure gradient over a compact spatial distance, contributes to the reduction of bubble size and enhances their efficiency.

Subsequently, the bubbles are ushered into the impingement bowl, where dispersion back into the pulp is facilitated. This innovative setup creates three distinct contact zones - the blast tube, shockwave zone, and impingement bowl - effectively maximizing the probability of bubble-particle interaction.

The video below demonstrates the comparison between a self-aspirated pneumatic downcomer and a Concorde blast tube submerged in water. Noticeable disparities are evident in both bubble size and bubble flux between the two setups.

Performance comparison of a normal aspirated pneumatic cell (left) and the Concorde Cell (right)
Performance comparison of a normal aspirated pneumatic cell (left) and the Concorde Cell (right)

When examining the kinetic difference between the Concorde Blast Tube and a Self-Aspirated Pneumatic Cell in laboratory setup, we can see the Blast Tube achieving much higher flotation kinetics. This is attributed to the finer bubble size and larger bubble flux previously discussed.

Cumulative yield against flotation time for the pumped feed
Cumulative yield against flotation time for the pumped feed

The image below shows a 3D rendering of an upgraded Self Aspirated Pneumatic flotation cell with the newly installed blast tubes. Iconic red impingement bowls can be seen as well.

Conclusion

In wrapping up our exploration of the evolution of flotation technology, it becomes abundantly clear that continuous innovation stands as the bedrock of progress within the mineral processing industry. The journey from traditional mechanical systems to the cutting-edge realm of self-aspirated pneumatic flotation systems, characterized by transformative technologies like the Concorde Blast Tube upgrade, underscores the industry's unwavering commitment to enhancing efficiency and staying at the forefront of progress.

It is evident that adopting advanced flotation systems is not merely an option; it is a necessity for those striving to maintain competitiveness in a landscape characterized by rapid evolution. The benefits of embracing such technologies extend far beyond immediate gains in efficiency and productivity. They pave the way for a more sustainable and economically viable future in mineral processing, aligning with the industry's overarching goal of responsible and forward-thinking operations.

Enjoyed this article? Try this next
The ultimate guide to flotation inspections
This blog guides you through the potential flotation issues and their causes as well as the impact in terms of monetary or time value.
Read more
Mining